Commandité

Mises à jour récentes
  • About impeller
    The humble impeller is one of the smallest pieces of equipment on board, but it tends to cause the most problems. Impeller failure is responsible for more boating vacations and summer cruises than any other reason. "The impeller is one of the smallest components on a ship, but one of the most important, and can fail at any time, often without prior notice. It can also cause significant damage...
    0 Commentaires 0 parts
  • WHAT ARE PUMP HOUSINGS? 
    Pump Housing A pump is a mechanical tool that gives enough pressure to move the liquid through the system at the desired flow rate. Therefore it is a means to change mechanical work into fluid energy. The pump can be widely classified as a centrifugal pump and positive displacement pump. So far, centrifugal pumps are the most widely used pumps. What are Pump Housings?   Simply put,...
    0 Commentaires 0 parts
  • Investment Casting Tolerances
    Investment casting tolerances are the range of dimensions that can be met by investment casting. There are many investment casting processes, such as water glass lost wax casting, lost foam casting, sol casting and so on. . Each casting process has its own casting molding method, which is suitable for different types of products. Tolerances can be affected by a variety of factors. Things like...
    0 Commentaires 0 parts
  • carbon steel castings
    What is carbon steel?Carbon steel is one of the main materials of steel castings in the world. Carbon steel can be divided into the following categories according to the carbon content: Mild Steel (< 0.20% C): Provides a range of tensile properties by heat treatment and can be hardened to provide high surface hardness, wear resistance and good core ductility. Medium Carbon Steel (0.20 to...
    0 Commentaires 0 parts
  • What are steel castings?
    Steel castings are a specific type of casting that includes different kinds of steel. Steel castings have a higher softening point and more noticeable shrinkage, which needs to be considered in mold design. Attention should be paid to the thickness of the shape dimples, as thinner areas cool faster than thicker areas, which can concentrate internal stress, which can lead to cracks. Liquid steel...
    0 Commentaires 0 parts
  • Aluminum sand casting process
    Aluminum sand casting sand molds consist of two parts; the top (top) and the drag (bottom). Each mold is contained in a housing called a flask. The sandbox acts as an external frame, compressing the model to form the sand and determine the overall mold dimensions. Before the flask is closed, cores can be placed inside the mold to create the internal casting configuration. Create sprue holes...
    0 Commentaires 0 parts
  • 3D Printing Investment Casting
    As the technology matures, it becomes increasingly apparent that the greatest benefits of 3D printing often come indirectly. Its use in prototyping illustrates this most directly; the ability to iterate designs quickly or produce sample parts for customers leads to better products, even if most of these products are not themselves 3D printed. Additive manufacturing (AM)—3D printing in production—is emerging, but some of the best examples of its use remain indirect.

    https://www.investmentcastingpci.com/blog/what-is-3d-printing-investment-casting/
    3D Printing Investment Casting As the technology matures, it becomes increasingly apparent that the greatest benefits of 3D printing often come indirectly. Its use in prototyping illustrates this most directly; the ability to iterate designs quickly or produce sample parts for customers leads to better products, even if most of these products are not themselves 3D printed. Additive manufacturing (AM)—3D printing in production—is emerging, but some of the best examples of its use remain indirect. https://www.investmentcastingpci.com/blog/what-is-3d-printing-investment-casting/
    WWW.INVESTMENTCASTINGPCI.COM
    What is 3D Printing Investment Casting | JC Casting
    3D printing patterns for the purpose of 3D printing investment casting are all the time more becoming the go-to answer for artists, applied scientists, and
    0 Commentaires 0 parts
  • Silica sol casting
    Why is silica sol used in investment casting?Silica sol is a kind of emulsion colloid. Because the colloidal particles are tiny (10-20 microns) and have a large surface area, it does not affect the true color of the coating material. Silica sol is miscible with water and immiscible with organic solvents. Soluble in alcohol or water mixed in any proportion. The salient feature of silica sol is...
    0 Commentaires 0 parts
  • Defect Analysis and Remedial Measures of Investment Casting
    One of the biggest pitfalls of investment casting - cracks. In addition, there are some other defects in the production process of investment castings. Here, we will introduce them, analyze the causes and provide basic remedial solutions against them. Foundry production is a complex multi-step process. The occurrence of some investment casting defects caused by some wrong operations is avoided. Once it happens, how do we prevent it from happening?
    https://www.investmentcastingpci.com/blog/investment-casting-defects-analysis-and-remedies/
    Defect Analysis and Remedial Measures of Investment Casting One of the biggest pitfalls of investment casting - cracks. In addition, there are some other defects in the production process of investment castings. Here, we will introduce them, analyze the causes and provide basic remedial solutions against them. Foundry production is a complex multi-step process. The occurrence of some investment casting defects caused by some wrong operations is avoided. Once it happens, how do we prevent it from happening? https://www.investmentcastingpci.com/blog/investment-casting-defects-analysis-and-remedies/
    9 Big Investment Casting Defects | Remedies | JC Casting
    It is avoidless that some investment casting defects are occurred .Here we list 9 big investment casting defects Analysis and Remedies methods
    0 Commentaires 0 parts
  • Forging and casting are two very different manufacturing methods. When casting something, the material is heated above its melting temperature, then poured into a mold to solidify. When something is forged, it is physically forced into shape while remaining solid - despite the constant heat it is subjected to.https://www.investmentcastingpci.com/blog/difference-between-casting-and-forging/
    Forging and casting are two very different manufacturing methods. When casting something, the material is heated above its melting temperature, then poured into a mold to solidify. When something is forged, it is physically forced into shape while remaining solid - despite the constant heat it is subjected to.https://www.investmentcastingpci.com/blog/difference-between-casting-and-forging/
    WWW.INVESTMENTCASTINGPCI.COM
    6 Difference Points Casting VS Forging | JC casting
    There are several different methods and techniques in manufacturing metal components. What are the differences Casting VS Forging?
    0 Commentaires 0 parts
Plus de lecture
Commandité

Don't forget, ads time: PentaVerge | AQU | Debwan | ICICTE | Nasseej | ESol | OUST | CorpSNet | PoemsBook | TopDeals | TheReaderView